I worked for some time with the notion of doing a biomimetic approach to constructing a telepresence hand by using mixed plastics extrusions. It turned out that the finger joints were made with what amounted to a fluid filled bag harnessed in with ligaments. I could do the ligaments but had no hope of printing a fluid filled bag at the scale required by a human-sized hand.
From there I've designed pinned hinge joints. It was a real challenge understanding how to print a 0.84 mm hole accurately for the pin. I finally came up with a workable approach last weekend.
At this point I know how to do the joints and now face the problem of securing the latex band that contracts the finger.
It is nice having a little time to work on the project after the loss of last Fall and much of the winter to the demands of my day job.
From there I've designed pinned hinge joints. It was a real challenge understanding how to print a 0.84 mm hole accurately for the pin. I finally came up with a workable approach last weekend.
At this point I know how to do the joints and now face the problem of securing the latex band that contracts the finger.
It is nice having a little time to work on the project after the loss of last Fall and much of the winter to the demands of my day job.
Hi Forest. I mentioned in the comments last year that I was thinking along similar lines. Well things have gotten a little out of hand since then! Anyway I thought you might be interested in looking at my site, since I finally got around to updating it.
ReplyDeletehttp://anthromod.com/blog/